When running X-Window on the host system, please don’t use any custom mode lines with special video modes. PS/2 IP-KVM switch recognizes a limited number of common video modes. Connect Ethernet and/or modem, depending how you want to access PS/2 IP-KVM switch. Repeat item 5 procedure to all of PC ports of PS/2 IP-KVM switchħ. To plug these three connectors into the respective ports of computer.Ħ. Then connect the HDDB-15 pin male type for PC video, the purple Miniĭin 6 pin female type for keyboard and the green Mini Din 6 pin female type for mouse. Plug the HDDB15 pin connector of a 3-in-one cable into any label computer port on the rear of PS/2 IP-KVM switch unit. Connect the mouse to the PS/2 IP-KVM switch.ĥ. Connect the keyboard to the PS/2 IP-KVM switch.Ĥ. Connect the monitor to the PS/2 IP-KVM switch.ģ. Connect the power supply to PS/2 IP-KVM switch.Ģ. In order to connect the PS/2 IP-KVM switch perform the following steps:ġ. Connecting PS/2 IP-KVM switch to the host system Besides, PS/2 IP-KVM switch is a KVM switch, which can also be used with a local console. PS/2 IP-KVM switch can be used in a multi administrator and multi server environment as well. PS/2 IP-KVM switch redirects local keyboard, mouse and video data to a remote administration console.

Using PS/2 KVM over IP switch as a KVM switch Connecting PS/2 IP-KVM SWITCH to the host systemĤ.1.1 Initial configuration via DHCP serverĤ.1.2 Initial configuration via serial consoleĤ.1.3 Keyboard, Mouse and Video configurationĤ.1.3.3 Auto mouse speed and mouse synchronization

Avocent av3216 default password